CARL VALENTIN printers Spectra

Specifications of CARL VALENTIN Spectra 107 printer:

• Angular head. A printer with this type of head prints with high quality and at a high speed of 200-300 mm/s, it uses only ink ribbons for the angular head;
• Ink ribbon saving mechanism;
• Unique accessory – ultrasonic label sensor. This sensor detects gaps between transparent labels;
• Prints in two ways: by thermal transfer (the printer head heats the ribbon, the ribbon ink liquefies and sticks to the surface of the paper) and by thermal method (the printer head heats the surface of special, heat-sensitive paper, which changes colour);
• Printing resolution: 305 dpi;
• Maximum print speed: 300 mm/s;
• Print width: 106.6 mm;
• Maximum width of the label strip: 116 mm;
• Minimum width of the label strip: 15 mm;
• Minimum height of labels: 6 mm (15 mm when used with divider or cutter);
• Maximum label length: 1200 mm;
• Printer dimensions: 275x375x475 mm;
• Weight: about 21 kg;
• Maximum roll diameter: up to 200 mm.

Specifications of CARL VALENTIN Spectra 108 printer:

• Spectra 108 printer is equipped with a flat head. As a result, this printer prints using the cheapest on the market wax-based ink ribbons;
• Unique accessory – ultrasonic label sensor. This sensor detects gaps between transparent labels;
• Prints in two ways: by thermal transfer (the printer head heats the ribbon, the ribbon ink liquefies and sticks to the surface of the paper) and by thermal method (the printer head heats the surface of special, heat-sensitive paper, which changes colour);
• Print resolution: 300 dpi;
• Maximum print speed: 300 mm/s;
• Print width: 108.4 mm;
• Maximum width of the label tape: 116 mm;
• Minimum width of the label tape: 15 mm;
• Minimum height of labels: 6 mm (15 mm with divider or cutter);
• Maximum label length: 1200 mm;
• Dimensions: 275x380x475 mm;
• Weight: about 19 kg;
• Maximum roll diameter: up to 200 mm.

Specifications of CARL VALENTIN Spectra 162 printer:

• Wide – suitable for A5 format labels;
• Unique accessory – ultrasonic label sensor. This sensor detects gaps between transparent labels;
• Prints in two ways: by thermal transfer (the printer head heats the ribbon, the ribbon ink liquefies and sticks to the surface of the paper) and by thermal method (the printer head heats the surface of special, heat-sensitive paper, which changes colour);
• High print resolution: 300 dpi;
• Maximum print speed: 150 mm/s;
• Print width: 162.6 mm;
• Maximum width of the label strip: 176 mm;
• Minimum width of the label strip: 15 mm;
• Minimum height of labels: 15 mm (25 mm with divider or cutter);
• Maximum label length: 800 mm;
• Dimensions: 335x380x475 mm;
• Weight: about 21 kg;
• Maximum roll diameter: up to 200 mm.

Specifications of CARL VALENTIN Spectra 216 printer:

• Wide – suitable for A4 format labels;
• Unique accessory – ultrasonic label sensor. This sensor detects gaps between transparent labels;
• Prints in two ways: by thermal transfer (the printer head heats the ribbon, the ribbon ink liquefies and sticks to the surface of the paper) and by thermal method (the printer head heats the surface of special, heat-sensitive paper, which changes colour);
• High print resolution: 300 dpi;
• Maximum print speed: 100 mm/s;
• Print width: 216.8 mm;
• Maximum width of the label tape: 226 mm;
• Minimum width of the label tape: 100 mm;
• Minimum height of labels: 15 mm (25 mm with divider or cutter);
• Maximum label length: 600 mm;
• Dimensions: 385x380x475 mm;
• Weight: about 28 kg;
• Maximum roll diameter: up to 200 mm.

We are always ready to answer your questions, if any. Contact us by phone +370 685 680 96 or e-mail vaidas.pukinskas@pakmarkas.lt.